Blog · Music Production

Mixing vs Mastering: What Each One Is and the Steps of Each

By Yurian Barter · Academia Barter Rubio · Updated November 2026

Quick answerMixing is balancing and shaping the individual tracks of a song (vocals, drums, bass, synths) so they work together as one stereo file. Mastering is the final polish on that stereo file: small tonal fixes, consistent loudness, and preparing it for release on every platform. Mixing comes first; mastering comes second.

What is the difference between mixing and mastering?

Think of a song as a meal. Mixing is cooking: you combine the ingredients (individual tracks) and balance the flavors. Mastering is plating and quality control: you make small final adjustments so the dish looks and tastes right wherever it is served.

MixingMastering
Works onMany tracks or stemsOne stereo file
Main goalBalance, clarity, space, emotionConsistency, final tone, loudness, delivery
Size of changesLarge and detailedSmall and subtle
Typical toolsEQ, compression, reverb, delay, automation, panningGentle EQ, light compression, limiter, metering
OutputA stereo mixdownRelease-ready files

If a vocal is too quiet against the guitars, that is a mixing problem. If the whole song sounds a little dull next to other songs in your playlist, that is a mastering question.

What are the steps of mixing?

Every engineer has a personal workflow, but most mixes follow a similar order. Here is a practical one for beginners.

  1. Prepare the session. Name and color-code tracks, group similar ones (drums, vocals), remove clicks and unwanted noise, and check that everything is in time.
  2. Set a rough balance. Pull all faders down, then bring them up starting with the most important elements, usually drums, bass and lead vocal. Do this before using any plugins.
  3. Pan. Place sounds left to right to create room. Keep kick, bass and lead vocal near the center, and spread guitars, keys and percussion.
  4. EQ. Remove muddy or clashing frequencies and give each instrument its own space. Cutting is often more useful than boosting.
  5. Compress. Control dynamics so the vocal sits steadily and the drums feel punchy. Use moderate settings and compare with the effect bypassed.
  6. Add effects. Reverb and delay create depth. Send effects on buses usually keeps things tidier than putting them on every track.
  7. Automate. Raise a word in the vocal, lift the chorus, duck a pad under a lead. Automation brings a mix to life.
  8. Check and revise. Listen on headphones, speakers, and a phone. Take breaks, then fix what you hear with fresh ears.
  9. Export the mixdown. Leave headroom (peaks comfortably below 0 dBFS; a common guideline is a few dB of space) and avoid a heavy limiter on the master bus.

What are the steps of mastering?

Mastering works with the finished mix, so every move affects the whole song. The steps are fewer, and the moves are smaller.

  1. Listen critically. Use a quiet room and good monitoring. Note tonal balance, dynamics, stereo width and any flaws.
  2. Fix issues or send the mix back. If the vocal is buried or the bass is out of control, the right answer is usually a mix revision, not a mastering fix.
  3. Tonal balance with EQ. Gentle shelves or broad cuts of a dB or so can open the top end or tighten the low end.
  4. Dynamics. Light compression, sometimes multiband, to glue the track and control uneven sections.
  5. Stereo adjustments. Check mono compatibility and avoid over-widening, which can weaken the center.
  6. Loudness with a limiter. Raise the level to a competitive but healthy point without audible distortion or a crushed feel.
  7. Compare to references. Match levels, then switch between your master and professional tracks in a similar style.
  8. Sequence and finalize an album. Set gaps between songs and keep volume and tone consistent across the project.
  9. Export deliverables. Typically a high-quality WAV, plus any formats a distributor or platform asks for. Requirements change, so check current specs.

Why should mixing always come before mastering?

Mastering assumes the balance is already right. Small adjustments on a stereo file cannot separate a buried guitar from a crowded vocal, and heavy fixes at this stage usually cause side effects elsewhere in the song.

Some producers apply a light limiter on the master bus while mixing to preview loudness. That is fine as long as it is removed before exporting the mixdown for mastering.

What are the most common mistakes?

Can you master your own songs, or should you hire someone?

You can absolutely learn to master your own music, especially for demos, early releases and practice. Modern tools, including automated and AI-assisted mastering services, can give quick, decent results. Their quality and pricing vary by platform, so test a few and compare.

A human mastering engineer offers a trained second opinion, a well-tuned listening room, and feedback on your mix. This can be valuable for important releases or albums. A sensible approach: learn the basics yourself, then decide per project whether outside ears are worth it.

How can you practice the difference?

Try this short exercise with one song:

  1. Mix the song, leaving a few dB of headroom on the master.
  2. Export the mixdown, then close the session.
  3. The next day, open the stereo file in a new project and master it using only gentle EQ, light compression and a limiter.
  4. Compare the mix, the master and a reference track at matched volume.
  5. Write down what changed. If you wanted bigger changes, note which belong to the mix.

Repeat with different genres. You will quickly start hearing which problems belong to which stage.

Frequently asked questions

Is mixing or mastering more important?

Mixing has the bigger impact because it shapes balance, space and emotion. A strong mix can sound good even with basic mastering, while a poor mix cannot be fully repaired later. Both matter, but the mix is the foundation the master depends on.

Do I need to master a song before releasing it?

Not legally, but it is strongly recommended. Mastering helps your song sound consistent and competitive next to other releases, and it checks that the track translates across devices. Even a simple, careful master is usually better than releasing the raw mixdown.

How much headroom should I leave for mastering?

A common guideline is peaks a few dB below 0 dBFS, for example around -3 to -6 dB, with no limiter on the master bus. Exact preferences vary by engineer, so check any specs given by the person or service mastering your track.

Can mastering fix a bad mix?

Only in small ways. Mastering can adjust overall tone and loudness, but it cannot independently rebalance instruments inside a stereo file. If the vocal is too quiet or the bass is overwhelming, return to the mix and fix the problem there.

Do I need different tools for mixing and mastering?

Many tools overlap, such as EQ and compressors, but they are used differently. Mixing uses them per track with bigger moves. Mastering uses them on the full song with subtle moves, plus a limiter and accurate metering. Good monitoring helps in both.

Want to hear the difference for yourself? Practice mixing and mastering with short lessons and an AI tutor that gives feedback on your workflow. See the course: Music Production.

Keep learning

Learn this step by step in the super academy

Short lessons, challenges and Barty, your 24/7 AI tutor. One membership unlocks every school.

More guides

How to Make a Beat in FL Studio: First Beat GuideHow to Run Facebook Ads: Step-by-Step GuideHow to Advertise on TikTok: Step-by-Step for Small BusinessAmazon Ads for Beginners: Ad Types, ACOS & First CampaignChatGPT Ads: How They Work and How to PrepareMicrosoft Advertising Guide: Bing Ads Step by Step